EV charger repairs & safety checks · Derby

EV charger repairs and safety checks in Derby

Fault finding, repairs, servicing and safety checks for home and workplace EV chargers across Derbyshire, from tripping and slow charging to unsafe installations, including chargers fitted by someone else.

Quote within 24 business hours: send photos or a short video of the job, with your name, on WhatsApp, or request a quote online.

●  Serving Derby since 2009

●  All major charger brands

●  NAPIT registered

●  Chargers fitted by others

●  Serving Derby since 2009

●  NAPIT registered

●  All major charger brands

●  Chargers fitted by others

EV charger fitted to a wall in Derby, ready for a safety check

Keeping your EV charger safe and reliable

An EV charger becomes part of your daily routine, so you need to know it's working safely. Chargers draw a lot of power for hours at a time, so even small electrical faults can cause nuisance tripping, slow charging or, in more serious cases, overheating.

Many of the faults we see in Derbyshire homes and businesses come down to rushed installations or missing safety protection. Some owners call us because the charger has stopped working altogether; others aren't sure their installer carried out the right checks.

We assess the whole system, not just the charger, so the repair fixes the cause rather than the symptom, and your installation is safe, compliant and reliable afterwards.

Signs your charger needs checking

✓  Tripping the RCD or RCBO

✓  Slow or failed charging sessions

✓  Warm cables or a warm charger casing

✓  Flashing lights or fault codes

✓  No certificate from the original installer

Common EV charger faults we fix

Tripping the RCD or RCBO

Usually a wiring fault, water ingress, poor earthing, an overloaded circuit or a failing internal component. We trace the cause and make the system safe.

Charger not powering on

No lights or no session can mean a failed breaker, loose connections, a supply issue or an internal fault in the charger itself.

Slow or inconsistent charging

Often load balancing set up incorrectly, a weak Wi-Fi signal on a smart charger, undersized wiring or an internal fault.

Car not recognising the charger

Damaged pins, a failed contactor, communication faults or a worn tethered cable. We repair or replace the parts at fault.

Fault codes and warning lights

Every brand uses different codes. We read them and test for earth faults, overcurrent, failed components and firmware problems.

Wi-Fi and app problems

Signal improvements, router settings, app resets and reconfiguration, or a hardwired connection where Wi-Fi won't reach.

Overheating chargers or cables

A serious fault that needs attention straight away, usually loose terminals, undersized cable or a faulty contactor. We make it safe first.

Water ingress

Water inside the unit causes short circuits and corrosion. We assess the damage and repair it or advise on replacement.

Earthing and PME problems

Incorrect earthing is dangerous and can stop charging entirely. We diagnose it and bring the earthing up to the required standard.

What an EV charger safety check covers

A safety check looks at everything that supports the charger, not just the box on the wall, and is carried out to current BS 7671 requirements.

  • Protection devices: RCBO or RCD protection, surge protection and correctly rated breakers
  • Earthing and bonding: especially on PME (TN-C-S) supplies, plus main bonding to gas and water
  • Charger and cabling: casing and seals, tethered cable wear, terminals and mounting
  • The EV circuit: correctly sized, no signs of overheating, no DIY alterations
  • Load and capacity: whether your supply still copes after new appliances or changes in use
  • Smart features: Wi-Fi, app, load balancing, solar diversion settings and error logs

You get clear feedback on any faults found, the repairs we recommend and the compliance status of the installation.

Consumer unit with a tripped RCD being checked during an EV charger safety check
Smart EV charger in a garage in Derby being serviced

EV charger servicing

Like any electrical equipment that works hard every day, a charger benefits from a periodic service, particularly if it's outdoors, heavily used, or one of several chargers at a workplace.

A service includes a visual inspection of the unit, cable and connector, tightening and checking terminations, testing the RCD and protective devices, checking earthing, updating firmware where the manufacturer supports it, and a full test charge.

For businesses with staff or fleet chargers, regular servicing keeps chargers available and gives you a record that the equipment has been inspected. See our workplace EV charging page.

How we find and fix faults

1

Diagnose

Visual inspection, testing of the dedicated circuit and protective devices, error codes, and charger-to-vehicle communication.

2

Make safe

If we find a serious risk, we make the installation safe straight away. We never leave an unsafe charger connected.

3

Repair

Terminals, tethered cables, contactors, breakers, wiring or firmware, using manufacturer-approved parts wherever possible.

4

Test and report

A full test and test charge, with clear notes on what we found, what we fixed and anything still to do.

Chargers installed by others: no problem

You don't need to have used us before. We regularly repair, upgrade and safety-check chargers fitted by other companies, including installers who are no longer trading and fit-and-run firms that didn't provide aftercare.

We often correct installations with missing RCD/RCBO or surge protection, undersized circuits, incorrect earthing, unsuitable cable or unsafe outdoor locations. We don't criticise the previous installer; we show you what we've found and the most practical way to put it right.

Typical situations include an installer who won't come back, a landlord who needs a safety check, a business that has inherited chargers from a previous tenant, or a second-hand charger that has stopped working.

Brands we work on

✓  Zappi, Hypervolt and Ohme

✓  Pod Point and Wallbox

✓  Easee and EO

✓  Rolec and Project EV

✓  If parts are available, we can repair it

Surveys before a new installation

Many charger problems start with a rushed survey. Before a new installation, we check your main fuse, consumer unit and spare capacity, plan a neat and protected cable route, test Wi-Fi strength at the charger position, and confirm earthing and bonding.

If you have or are planning solar panels or a battery, we assess the inverter and surplus for solar charging. For businesses, we also look at multi-bay demand, load management and access control.

When a charger is beyond repair

Most faults can be repaired, but replacement is the safer or cheaper option when there is major internal failure, water damage, no spare parts for a discontinued model, recurring faults, or an original installation that is unsafe throughout.

Some owners also replace an older basic charger to get app control, off-peak scheduling, solar integration and load balancing. We'll always recommend a repair first if it's safe and affordable, and explain exactly why if it isn't. See our EV charger installation costs for replacement prices.

EV charger repair FAQs

Common causes include wiring faults, moisture getting into the unit, a faulty RCD, poor earthing or an internal charger fault. A safety check identifies the exact cause so it can be fixed properly.

Yes. We repair and inspect chargers fitted by national companies, independent installers and firms that are no longer trading.

Warning lights, slow charging, warm cables, failed sessions or unexplained tripping all mean the system should be checked. It's also worth a check if you never received a certificate.

Yes. A service covers a visual inspection, terminations, RCD and protective device testing, earthing, firmware updates where supported and a test charge. It's particularly worthwhile for outdoor, heavily used and workplace chargers.

It depends on the fault and the parts needed. We can often give an idea from photos and the fault code, and we always give you a fixed price before carrying out any repair.

It can be. Overheating, water ingress and earthing faults are safety risks, so stop using the charger and call us. If we find a serious risk, we make the installation safe straight away.

EV charger repairs across Derbyshire

We repair and service chargers across Derby, including Mickleover, Littleover, Spondon, Chaddesden and Oakwood, and the wider county, including:

Book an EV charger repair or safety check

Send us photos of your charger and consumer unit, the brand and model, and any fault codes, and we'll come back with clear advice and a fixed price.

West Point, 22 Brook St, Derby DE1 3TE

© 2026 All Rights Reserved | Derbyshire Electrical Specialists part of Derbyshire Specialists Group

Derbyshire Specialists Group Ltd is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and the term.