Rewiring · Derby & Derbyshire

House and commercial rewiring in Derby

Full and partial rewires for homes, offices, shops and industrial units across Derbyshire, starting with an EICR so the work is based on the real condition of your wiring, and finishing with full certification.

Quote within 24 business hours: send photos or a short video of the job, with your name, on WhatsApp, or request a quote online.

●  Serving Derby since 2009

●  EIC on completion

●  NAPIT registered

●  Homes and businesses

●  Serving Derby since 2009

●  NAPIT registered

●  EIC on completion

●  Homes and businesses

Electrician pulling new cable into a back box during a house rewire in Derby
Finance available on electrical work

Why rewiring matters

Electrical wiring doesn't last forever. Properties built before the 1980s in particular are likely to have wiring that no longer meets modern safety standards or copes with the demands of modern living.

A full or partial rewire brings your property up to current BS 7671 standards, reduces the risk of faults and fire, and makes the system fit for what you need now and next: EV chargers, smart home systems and high-load appliances included.

Every rewiring project starts with an Electrical Installation Condition Report (EICR), so we know exactly what's there before any work is planned and can tell you honestly whether you need a full rewire, a partial one or neither.

Signs you may need a rewire

✓  Flickering lights or frequent tripping

✓  Burning smells or discoloured sockets

✓  An old fuse box with no RCD protection

✓  Rubber, lead or fabric insulated cables

✓  A renovation or extra appliances planned

Old wiring we commonly find in Derby homes

Rubber-insulated cables (pre-1960s)

The rubber becomes brittle with age, cracks and can expose live conductors, increasing the risk of fire and electric shock.

Lead-sheathed cables (1920s–1950s)

A lead outer sheath brings a lead exposure hazard and poor earthing compared with modern standards.

Tough rubber sheathed (TRS)

A mid-century transitional cable with the same rubber degradation problems as older wiring.

PVC cable with no earth (1950s–1960s)

Early twin-core PVC often had no earth conductor, which makes metal switches and fittings unsafe.

Rewireable fuse boxes

Fuse wire is slow to respond to faults and there's no RCD protection. Most older wiring is still connected to one of these.

Not sure what you have?

Our tests show how safe your wiring is and what it can safely support in future, and what's likely if you don't upgrade the fuse box and wiring.

House rewiring in Derby

We start with an EICR to establish the condition of the existing wiring. If it finds outdated materials such as lead, rubber or aluminium wiring, damaged insulation or overloaded circuits, a full or partial rewire may be needed to keep your home safe.

Once a rewire is agreed, the old cables are removed, which means accessing walls, ceilings and floors. We take care with the structure of the house, but there will be cosmetic damage and mess, which is why many people rewire straight after buying an older property, before decorating.

A full rewire installs new cables, sockets and switches and a new consumer unit, to current standards:

  • Socket circuits sized for modern use
  • Lighting circuits with earth protection
  • Dedicated circuits for ovens, electric showers and other high-load appliances
  • A modern consumer unit with RCD and circuit-breaker protection, and surge protection

When the work is complete, we test every circuit and issue an Electrical Installation Certificate (EIC) confirming compliance with BS 7671.

New cables being run into a chased wall during a house rewire

How a house rewire works

1

EICR and quote

We test the existing installation, explain what we found and give you a fixed quote for a full or partial rewire.

2

First fix

Old cables come out and new cables are run through walls, ceilings and floors, with chases cut where needed.

3

Second fix

Sockets, switches, lights and the new consumer unit are fitted and every circuit is connected and labelled.

4

Test and certify

Full testing, an Electrical Installation Certificate and building control notification through our NAPIT registration.

Full and partial rewires

What to expect from a full rewire

The power will be off for much of the work, which can take several days to a couple of weeks depending on the size of the property. That can be disruptive, and some people arrange temporary heating and lighting, or stay elsewhere.

There will be dust, so cover anything you leave in the house. Most people redecorate afterwards, so it's the ideal time to plan any renovation work.

Partial rewires and making good

If the EICR shows that only part of the installation is at fault, such as one floor, an extension or a kitchen, a partial rewire can be the more cost-effective option.

Our electricians can fill the chases afterwards. If you're replastering anyway, it's often quicker and cheaper for your plasterer to do the final finish, and as part of the Derbyshire Specialists Group we can coordinate plastering and decorating for you.

Electrician testing a commercial distribution board in Derby

Commercial rewiring in Derby

Commercial rewiring differs from domestic work in scale, regulation and complexity. Offices, warehouses, retail units and industrial premises have higher loads, more circuits and often three-phase supplies that need specialist knowledge to work on safely.

Our electricians work to the Electricity at Work Regulations 1989, the Health and Safety at Work Act and fire safety requirements. Typical projects include:

  • Office rewiring and circuit upgrades for new equipment
  • Warehouse and industrial unit rewiring
  • Emergency lighting and fire alarm integration
  • Retail unit electrical refurbishment
  • Workplace and fleet EV charging infrastructure

Work is phased and planned around your operations to keep disruption to a minimum. See our commercial electrician page for our wider services.

Office rewiring

Office rewiring needs more planning than domestic work, because the business has to keep running. That means phased installation and careful coordination with your IT and facilities teams.

We carry out a site assessment first, then provide a detailed, phased project plan, so you know what happens when and how long each area will be affected.

A modern office rewire includes

✓  Circuits sized for current and planned equipment

✓  LED lighting replacing old fluorescents

✓  Surge protection for IT

✓  Smart controls and occupancy sensors

✓  Updated alarm and fire systems where required

Rewiring FAQs

No. Rewiring is notifiable work under Part P of the Building Regulations and must be done by an electrician registered with a government-approved competent person scheme. We're NAPIT registered, so we self-certify the work, issue the Electrical Installation Certificate and notify building control for you. You don't need a separate building control inspection.

Warning signs include wiring from before the 1980s, rubber, lead or fabric-insulated cables, flickering lights, frequent tripping, burning smells or discoloured sockets, and no RCD protection. Renovations and new high-power appliances can also mean an upgrade is needed. The most reliable answer comes from an EICR, which gives a definitive assessment of your wiring and any action required.

It depends on the size of the property and how the existing wiring is run. Expect the power to be off for much of the work, which can take several days to a couple of weeks. We give you a timescale with your quote.

Often, yes, but it is disruptive: there will be dust and periods without power. Some people arrange temporary heating and lighting or stay elsewhere for the noisiest stages. We talk you through the plan before we start.

Our electricians can fill the chases. As part of the Derbyshire Specialists Group we can also coordinate plastering, decorating and flooring repairs, so you deal with one company.

We've served Derby since 2009, we're NAPIT registered, and we carry out a full EICR before any rewiring, give you a fixed quote and complete all work to BS 7671 with full certification. Finance is available to spread the cost of larger jobs.

Rewiring across Derbyshire

We rewire homes and businesses across Derby, including Mickleover, Littleover, Chaddesden, Oakwood and Spondon, and the wider county, including:

Book a rewiring assessment

Tell us about the property, its age and what you're planning, and we'll arrange an EICR and give you a clear, fixed quote. Finance is available for larger projects.

West Point, 22 Brook St, Derby DE1 3TE

© 2026 All Rights Reserved | Derbyshire Electrical Specialists part of Derbyshire Specialists Group

Derbyshire Specialists Group Ltd is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and the term.