Fuse box upgrades for EV charging · Derby
Consumer unit upgrades, RCD/RCBO and surge protection, earthing and load checks, so your home or business can run an EV charger safely, reliably and to current regulations.
Quote within 24 business hours: send photos or a short video of the job, with your name, on WhatsApp, or request a quote online.
Before installing a charger, the first question is whether your property has the capacity to support it safely. Chargers draw a lot of power for hours at a time, and while most modern properties can accommodate one, many older consumer units or heavily used systems need some upgrades first.
A dedicated EV circuit has to run safely alongside everything else. Without enough spare capacity or the right protection, a charger can cause nuisance tripping, overheating or more serious risks.
That's why every installation starts with an assessment of your consumer unit, main fuse, earthing and overall demand. Most Derbyshire properties are suitable for smart EV charging once the right checks and protection are in place, and if anything needs upgrading we explain it clearly.
Regulations for EV circuits are stricter than for most household circuits. Several protections must be in place before a charger can be connected.
All work is carried out to current BS 7671 wiring regulations. A new EV circuit is notifiable under Part P of the Building Regulations, which we handle through our NAPIT registration.


Before installing a charger, we calculate your property's demand, including heating and hot water, cooking, showers and immersion heaters, lighting, sockets and, for workplaces, machinery and IT, and compare it with the capacity of your supply.
Most Derbyshire homes have a 60A, 80A or 100A main fuse, and EV chargers typically draw 16A to 32A. If the main fuse is already close to its limit, or several high-demand appliances run at once, charging needs managing.
Hot tubs, electric showers, underfloor heating and multiple EVs need extra planning. For businesses, we calculate peak loads so multiple workplace chargers don't disrupt essential operations.
Upgrades aren't always needed, but when they are, these are typical costs:
We confirm exactly what's needed, and the price, after looking at photos or surveying your board. See our EV charger installation costs for full installation prices, or our consumer unit upgrades page for upgrades without a charger.
Derbyshire has everything from Victorian terraces and 1930s semis to new builds and extended homes. Homes built before the 1990s often have ageing consumer units, no RCD protection and limited capacity, and wiring that has been extended over the years, so we assess its condition carefully.
Where the charger needs to go on a detached garage, outbuilding or garden room, cable runs are longer and may need burying, conduit or protective ducting, all weather-resistant and compliant.
Mixed wiring standards and DIY alterations aren't unusual in older homes. If we find anything that could compromise safety or performance, we explain the options and put it right. From terraces near the city centre to post-war semis in Mickleover, Allestree and Littleover, we tailor the work to the property.
Installed correctly, EV charging is very safe. Rushed installations without the right upgrades can overload circuits, causing nuisance tripping or overheating, and without RCD, RCBO and surge protection a fault could create a shock risk or damage the charger and your car's electronics.
Old fuse boxes, undersized wiring and DIY work increase fire risk under the sustained load of EV charging, and a charger on an inadequate supply may run slowly or fail to hold full charging power. Upgrades aren't about selling extra work; they make sure your property can handle the technology safely and reliably.
We carry out upgrades for EV charging across Derby, including Mickleover, Littleover, Chaddesden, Oakwood and Spondon, and the wider county, including:
© 2026 All Rights Reserved | Derbyshire Electrical Specialists part of Derbyshire Specialists Group
Derbyshire Specialists Group Ltd is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and the term.